Agilent Technologies 8960 Series Reference Manual page 386

READ
READ:WCPower[:ALL]?
Function Initiates and fetches a channel power measurement as a sequential operation.
Measurement results are returned in the following order: integrity, average channel power.
If the multi-measurement state is on, the result represents the average of a number of channel
power measurements. Multi-measurement state, by default, is off. To set up
multi-measurements, see
Query • Range: -99 to 99 dBm
• Resolution: 0.01 dB
Requirements Test Application Revision: A.01 and above
READ:WOBWidth[:ALL]?
Function Initiates and fetches an occupied bandwidth measurement as a sequential operation.
Measurement results are returned in the following order: integrity, average occupied bandwidth.
If the multi-measurement state is on, the result represents the average of a number of channel
power measurements. Multi-measurement state, by default, is off. To set up
multi-measurements, see
Query • Range: 0.0 to 10.0 MHz
• Resolution:.0001
Requirements Test Application Revision: A.02 and above
386
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_read.fm
"SETup:WCPower:COUNt[:SNUMber]"
"SETup:WOBWidth:COUNt[:SNUMber]"
.
.