Agilent Technologies 8960 Series Reference Manual page 505

Hide thumbs Also See for 8960 Series:

Table of Contents

Program Example - Standard Event Status Register

OUTPUT 714;"*ESR?" !Queries (reads) the Standard Event Status Register.

Reserved for future use.

Operation Complete

This bit is set to 1 if an error has occurred while

trying to read the test set's output queue. The

following events cause a query error:

• An attempt is made to read data from the output

queue when no data is present or is pending.

• Data in the output queue has been lost. An

example of this would be an output queue overflow.

This bit will always be 0.

This bit is set to 1 when the test set has completed all

pending operations and is ready to accept new

commands. This bit is only generated in response to

the *OPC IEEE 488.2 common command.

S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_status_std_evnt.fm

Standard Event Status Register