Step 5: Initiate And Fetch Measurements; Initiate A Set Of Concurrent Measurements; Fetch Measurement Results - Agilent Technologies 8960 Series Reference Manual

Step 5: INITiate and FETCh Measurements

Step 5: INITiate and FETCh Measurements
In this step you INITiate measurements, FETCh the results, and verify the results are valid.
•

"INITiate a Set of Concurrent Measurements"

•

"FETCh Measurement Results"

INITiate a Set of Concurrent Measurements
The test set is capable of performing concurrent measurements. To start the measurement process you
INITiate a set of concurrent measurements.
1190 OUTPUT Testset;"INIT:WBER;WTP;WWQ;WACL;WOBW;WSEM"
1200 Fetch_results! Go to a subroutine to handle the results
FETCh Measurement Results
To retrieve measurement results as they complete, you must set up a loop using the INIT:DONE? query.
Depending upon the output of the query, the program will either wait for a measurement to complete, FETCh
the result of a completed measurement, or continue the program once all measurements are complete. Once a
measurement result is FETChed, you should check its integrity indicator to verify that the result is valid.
1990 SUB Fetch_results
2000 COM /Address/ INTEGER Testset
2010 REPEAT
2020 OUTPUT Testset;"INIT:DONE?"
2030 ENTER Testset;Measdone$
2040 SELECT Measdone$
2050 CASE "WTP"
2060 OUTPUT Testset;"FETC:WTP:INT?;POW?"
2070 ENTER Testset;Integrity,Power
2080 IF Integrity=0 THEN
2090 Print_results(Measdone$,Power)
2100 ELSE
2110 Meas_error(Measdone$,Integrity)
2120 END IF
2130 CASE "WCP"
2140 OUTPUT Testset;"FETC:WCP:INT?;POW?"
2150 ENTER Testset;Integrity,Power
2160 IF Integrity=0 THEN
2170 Print_results(Measdone$,Power)
2180 ELSE
2190 Meas_error(Measdone$,Integrity)
2200 END IF
2210 CASE "WWQ"
2220 OUTPUT Testset;"FETC:WWQ?"
2230 ENTER Testset;Integrity,Evm,Ferr,Ooff,Perr,Merr
2240 IF Integrity=0 THEN
2250 Print_results(Measdone$,Evm,Ferr,Ooff,Perr,Merr)
2260 ELSE
2270 Meas_error(Measdone$,Integrity)
104
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_prog_getting_started_step5.fm