CALL[:CELL]:MCCode
CALL
[:CELL]
"Diagram Conventions" on page 210
CALL[:CELL]:MCCode[:SELected]
Function
Sets/queries the mobile country code (MCC) for the currently selected test application.
This setting cannot be changed while Operating Mode is set to "Active Cell." This setting can only
be changed when the Operating Mode is set to Cell Off (CALL:OPERating:MODE OFF).
Setting
Range: 0 to 999
Query
Range: 0 to 999
*RST Setting
1
Requirements
Test Application Revision: A.02 and above
Programming Example
OUTPUT 714;"CALL:CELL:MCCODE 310" !Sets the mobile country code to 310.
CALL[:CELL]:MCCode:WCDMa
Function
Sets/queries the mobile country code (MCC) when using the W-CDMA test application.
This setting cannot be changed while Operating Mode is set to "Active Cell." This setting can only
be changed when the Operating Mode is set to Cell Off (CALL:OPERating:MODE OFF).
Setting
Range: 0 to 999
Query
Range: 0 to 999
*RST Setting
1
Requirements
Test Application Revision: A.02 and above
Programming Example
OUTPUT 714;"CALL:CELL:MCCODE:WCDMa 310" !Sets the W-CDMA mobile country code to 310.
:MCCode
[:SELected]
:WCDMa
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_call_mccode.fm
CALL[:CELL]:MCCode
<sp><num value>
? (returns num value)
270