Agilent Technologies 8960 Series Reference Manual page 428

SETup:WOBWidth
SETup:WOBWidth:COUNt:STATe
Function Sets/queries the occupied bandwidth multi-measurement state.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 0 (off)
Requirements Test Application Revision: A.02 and above
Programming Example
OUTPUT 714;"SETUP:WOBWIDTH:COUNT:STATE ON" !Turns on occupied bandwidth
multi-measurements.
SETup:WOBWidth:TIMeout[:STIMe]
Function The setting form of this command performs two functions: (1) sets the occupied bandwidth
measurement's timeout (see
bandwidth measurement's timeout STATe to 1 (on).
The query form returns the occupied bandwidth measurement's timeout value.
Setting Range: 0.1 to 999.9 seconds
Resolution: 0.1 second
Query Range: 0.1 to 999.9
*RST Setting 10 seconds, on
Requirements Test Application Revision: A.02 and above
Programming Example
OUTPUT 714;"SETUP:WOBWIDTH:TIMEOUT:STIME 5 S"
!Sets timeout state to ON and sets the timeout time to 5 seconds.
SETup:WOBWidth:TIMeout:STATe
Function Sets/queries the occupied bandwidth measurement's timeout (see
state.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 0 (off)
Requirements Test Application Revision: A.02 and above
Programming Example
OUTPUT 714;"SETUP:WOBWIDTH:TIMEOUT:STATE ON"
428
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_setup_wobwidth.fm
"Measurement Timeouts" ) value, and (2) sets the occupied
"Measurement Timeouts" )