FETCh:WCDomain:PCERror[:ALL]?
Function
Queries the peak code domain error measurement. There are four numbers returned for each
measurement. The first three numbers describe channel at which the peak error result was
measured (channelization code, spread factor, I/Q channel type), and the last number is the peak
error.
Results are returned in the following order: channelization code, spread factor, I/Q channel type,
and peak code domain error.
Query
Channelization Code
• Range: 0 to 255, 9.91 E+37
Spread Factor
• Range: 4 to 256, 9.91 E+37
I/Q Channel Type
• Range: 0 = I, 1= Q, 9.91 E+37
Peak Code Domain Error
• Range: -99 to 0 dB, 9.91 E+37
• Resolution: 0.1
Requirements
Test Application Revision: A.02 and above
Programming Example
OUTPUT 714;"FETCH:WCDOMAIN:PCERROR:ALL?"
!Returns Channelization code, spread factor, I/Q channel type, and peak error.
FETCh:WCDomain:PCERror:CHANnel?
Function
Returns the orthogonal variable spreading factor (OVSF) code number (channelization code) at
which the peak code domain error was detected.
Query
Range: 0 to 255
Requirements
Test Application Revision: A.02 and above
Programming Example
OUTPUT 714;"FETCH:WCDOMAIN:PCERROR:CHANNEL?" !Returns channel at which peak error was detected.
FETCh:WCDomain:PCERror:ERRor?
Function
Queries the maximum peak code domain error.
Query
Range: -99 to 0 dB, 9.91 E+37
Resolution: 0.1
Requirements
Test Application Revision: A.02 and above
Programming Example
OUTPUT 714;"FETCH:WCDOMAIN:PCERROR:ERRor?" !Returns maximum peak code domain error.
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_fetch_wcdomain.fm
FETCh:WCDomain
335