Preparation And Operation; Mounting The Device; Connecting To A Power Supply - Weinmann MEDUMAT Standard2 Instructions For Use Manual

4

Preparation and operation

4.1 Mounting the device

4.2 Connecting to a power supply

The device is mounted on a portable unit as standard and is ready
for use. Observe the instructions for use of the portable units.
Loss of power due to combination of the device with
an incorrect power supply unit!
If you use a portable unit with the device combination
MEDUMAT Standard
MEDUCORE Standard
in the event that these are used with a 50 W power supply unit.
 Use only the more powerful 100 W power supply unit when
combining the devices MEDUMAT Standard
MEDUCORE Standard.
1. Check battery status
battery", page 46).
2. If necessary: Charge battery
in the device", page
3. Slide full battery into the battery compartment until it clicks
into place.
4 Preparation and operation
2
and MEDUCORE Standard or
2
, a loss of power may occur in the devices
(see "4.3 Using the rechargeable
(see "4.3.2 Charging the battery
46).
MEDUMAT Standard
2
and
2
EN 45