Preparation And Operation; Connecting Up The Prismapsg Module - Weinmann prismaPSG WM 100 MP Instructions For Use Manual

4 Preparation and operation

4 Preparation and operation

4.1 Connecting up the prismaPSG module

Requirement
30 EN prismaPSG
The prismaPSG (WM 100 MP) module is connected up to the
prismaCONNECT WM 100 MC module.
Only connect up the therapy devices and modules permitted in
accordance with these instructions for use. Only medically
approved PSG systems may be connected up to the prismaPSG
module.
• The device is switched on or off (see instructions for use for the
therapy device).
• The prismaCONNECT module is connected up to the therapy
device (see instructions for use for the prismaCONNECT
module).
1. Plug the connector of the supplied PSG connection cable into
the PSG connection on the prismaPSG module.
2. Connect the other connector of the PSG connection cable up
to the module interface on the prismaCONNECT module.
3. Connect the prismaPSG module up to a PSG. There are
preconfigured connectors and a universal cable for
configuration available for this purpose.
Accessories", page 39).
(see "10.3