Crl Optional - ADTRAN 1000R Series Command Reference Manual

Command Reference Guide CA Profile Configuration Command Set

crl optional

Use the crl optional command to make CRL verification optional.
Syntax Description
No subcommands.
Default Values
By default, CRL optional is enabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1 Command was introduced.
Functional Notes
If enabled, the AOS is able to accept certificates even if no CRL is loaded into the configuration. Currently,
this is the only mode supported by the AOS for CRL negotiations.
Usage Examples
The following example sets CRL verification as optional:
(ca-profile)#crl optional
61200510L1-35E Copyright © 2005 ADTRAN 1216