Related To Plotter Environment; Fan Suction Setting (Fan Power) - GRAPHTEC FC9000 Series User Manual

10-3

Related to plotter environment

Fan suction setting (FAN POWER)

It may not feed properly if the media is thin, so set to "WEAK".
Operation
1
Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
2
Press the POSITION ( ) key (ADV.).
ADVANCE screen (1/4) is displayed.
3
Press the POSITION ( ) key.
ADVANCE screen (4/4) is displayed.
4
Press the [4] key (FAN POWER).
FAN POWER screen is displayed.
5
Press the [1] key (NORMAL) or the [2] key (WEAK).
6
7
Press the [PAUSE/MENU] key.
It will return to default screen.
Supplement
It will return to ADVANCE screen (4/4) without
changing the settings when you press the [ESC]
key (CANCEL).
10-7