Related To Plotter Environment; Fan Suction Setting (Fan Power) - GRAPHTEC CE6000-120AP User Manual

Related to Plotter Environment

Fan Suction Setting (FAN POWER)

This function sets the suction force used to affix media to the plotter.
It may not feed properly if the media is thin, so decrease the suction force.
Operation
1
Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
2
Press the POSITION ( ) key (ADV.).
ADVANCE setting screen (1/2) is displayed.
3
Press the POSITION ( ) key.
ADVANCE setting screen (2/2) is displayed.
4
Press the [2] key (FAN POWER).
FAN POWER setting screen is displayed.
5
Press the [1] key (NORMAL) or the [2] key (WEAK).
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ADVANCE setting screen (2/2).
7
Press the [PAUSE/MENU] key.
It will return to the default screen.
Supplement
Perform the settings in Normal menu.
9-6