Installing The Printed Document Guard Kit (Option) - Olivetti d-Copia 6500MF Plus Service Manual

1-2-9 Installing the Printed Document Guard Kit (option)

Printed Document Guard Kit installation requires the following parts:
Parts
Printed Document Guard Kit (B)
Supplied parts of Printed Document Guard Kit:
Parts
Copy guard PWB
FFC (short)
FFC (long)*
Mount plate B*1
Screws M3 x 6*2
*1: Not used in this model.
*2: One piece is used in this model.
Procedure
1. Press the power key on the operation
panel to off. Make sure that the power
indicator and the memory indicator are
off before turning off the main power
switch. And then unplug the power
cable from the wall outlet.
2. Remove nine screws and then remove
the rear upper cover.
*: To fix a cover, insert the hook at the left
top first by bowing the cover.
Service Manual
Quantity Part.No.
1
Quantity Part.No.
1
2
2
1
2
Hook
Screws
Screws
1-2-7 8
-
-
-
-
-
-
Rear upper
cover
Screws
Screws
Figure 1-2-1 21
2N8/2N7-3
Y116520-