22. Pass the connector of the key counter
wire through the aperture in the opera-
tion mount cover B and refit the opera-
tion mount cover A.
23. Refit the arm hinge cover A, B and
operation mount cover C.
24. Refit the controller box.
25. Refit the rear upper cover.
26. Peel the protective pad and then affix
two tray films over the tray mount.
Service Manual
Aperture
Operation mount cover A
Figure 1-2-67
Tray films
Figure 1-2-68
1-2-44
Key counter wire
Tray mount
2N8/2N7
Y116520-