Olivetti d-Copia 6500MF Plus Service Manual page 160

Item No.
U034 5. Change the setting value using the cursor +/- or numeric keys.
For output example 1, increase the value. For output example 2, decrease the value.
6. Press the start key. The value is set.
Remark
When changing the setting value of [Large] each item is modified, equal to amount of the value
which is changed adds also the value of [Small] each item and is pulled.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following
adjustments in maintenance mode for optimizing reading positions.
U034
Adjustment: Center line adjustment
1. Press the system menu key.
2. Press the start key to output a test pattern.
3. Press the system menu key.
4. Select the item to be adjusted.
[LSU Out Left]
Display
MPT
Cassette1
Cassette2
Cassette3
Cassette4
Cassette5
Cassette6
Cassette7
Duplex
Service Manual
Leading edge
registration
(20 ± 1.0 mm)
Correct image
U066
(P.1-3-53)
Table
Description
Paper feed from MP tray
Paper feed from cassette 1
Paper feed from cassette 2
Paper feed from optional cassette 3
Paper feed from optional cassette 4
Paper feed from optional cassette 5
Paper feed from optional cassette 6
Paper feed from optional cassette 7
Duplex mode (second)
Description
Output
example 1
Figure 1-3-4
U071
(P.1-3-58)
DP
Setting
range
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
-3.0 to 3.0
1-3-38
2N8/2N7
Output
example 2
Initial Change in
setting value per step
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
0 0.1 mm
Y116520-