Checking
procedure at the
Corrective action at the occurrence of
occurrence of
J13X1
J13X
Items for Initial Checks
1
Middle sensor (MS): Conduct
2
connectivity check, mounting location
check, operation check (U031)
Assist clutch 1 (ACSL1): Operation
3
check (U032)
Middle motor (MM): Operation check
4
(U030)
5
Feed PWB 2: Replace
6
Engine PWB: Replace
Checking
procedure at the
Corrective action at the occurrence of
occurrence of
J40X1
J40X1
1
Items for Initial Checks
2
Registration sensor (RS): Conduct
connectivity check, mounting location
check, operation check (U031) and U051
- Slack Margin Settings.
3
Registration motor (RM): Operation
check (U030)
4
Feed PWB 1: Replace
5
Engine PWB: Replace
Service Manual
On/Off control signal output connector
(terminal), point of checking connection
see page 1-4-26
Feed PWB 2 YC8-9
Feed PWB 2 YC10-1
Feed PWB 2 YC7-1 to 4
On/Off control signal output connector
(terminal), point of checking connection
see page 1-4-26
Feed PWB 2 YC7-12
Feed PWB 1 YC25-1 to 4
1-4-40
2N8/2N7
Y116520-