Olivetti d-Copia 6500MF Plus Service Manual page 217

Item No.
U167 Checking the fuser count
Description
Displays the fuser count for checking.
Purpose
To check the fuser count or drive time after replacement of the fuser unit.
Method
1. Press the start key. The fuser count is displayed.
Cnt
Release(Time)
Press(Time)
Completion
Press the stop key.
* : The screen for selecting a maintenance item No. is displayed.
U169 Checking/setting the fuser power source
Description
Displays and settings the reference voltage of the fuser IH PWB.
Purpose
To check the reference voltage.
* : When U021 is being executed, set the same voltage with the voltage of the IH control
PWB.
Method
1. Press the start key.
2. Select the item to be set.
Set Fuser
Setting: [Set Fuser]
Display
Mode
1: 100 V specifications 2: 200 V specifications 3: 110 V specifications
3. Press the start key. The setting is set.
Completion
Press the stop key.
* : The screen for selecting a maintenance item No. is displayed.
Y116520-3
Display
Fuser unit count value
Fuser unit drive time (release)
Fuser unit drive time (press)
Display
Destination setting for Fuser
Reference voltage
Description
Description
Description
Description
1-3-95
2N8/2N7
Setting range
1 to 3
Service Manual