4. Remove the round terminals from the
scanner wire springs on scanner unit
left side.
5. Remove the scanner wire.
Fitting the scanner wires
6. Move the mirror 2 frame as shown in
the figure and insert two frame securing
tools into the positioning holes at the
front and rear of the machine center to
fix the mirror 2 frame in position.
Y116520-3
Round terminal
Red-marked
Scanner wire
spring
Frame securing tool
Mirror 2 frame
1-5-41
Round terminal
Red-marked
Scanner wire
spring
Figure 1-5-67
Frame securing tool
Figure 1-5-68
Service Manual
2N8/2N7