(7) Detaching and refitting the hard disk unit
Procedure
1. Perform maintenance mode U917
(backup data reading) (see page 1-3-
193).
2. Remove the rear upper cover (see page
1-5-3).
3. Release the wire saddle.
4. Remove two screws.
5. Unhook two hooks and pull out the
HDD bracket a little.
Service Manual
Screws
Wire saddle
Hook
Hook
HDD bracket
1-5-136
Figure 1-5-222
Figure 1-5-223
2N8/2N7
Y116520-3