Olivetti d-Copia 6500MF Plus Service Manual page 873

Maintenance
Section
part/location
Driving, Drum filter
Other
Developer filter
Belt filter
LSU filter
Left filter
Eject filter
Each Clutches
Sensors
Image quality
* : Please do not use spray containing flamable gas for air-blow or air-brush purposes.
(4) Image adjustment after replacing the maintenance kit
Perform the following maintenance mode after replacing the maintenance kit (MK-6715A/MK-6715C):
Executable using preset-settings of the U952 maintenance mode workflow.
Maintenance kits
MK-A
MK-C
* : When the forwarding pulley, paper feed pulley or separation pulley is replaced, perform maintenance
mode U903 (clearing the jam counter) (see page P.1-3-186).
Execute Maintenance Counter - Cassette - Counter Clear of U251 (Maintenance counter limits/clear)
(see page P.1-3-133).
Y116520-3
Periodic maintenance
User
call
300
CL CL
CL CL
CL CL
CL CL
CH
RE
RE
CH
RE
RE
CH
CH
RE
CH
CH
RE
CH CH
AD AD
Maintenance mode
U119/ U140/ U127/ U464/ U412/ U464/ U410/ U251
U464/ U410/ U251
(x1000 counts)
600 900 1200
CL CL CL
CL CL CL
CL CL CL
CL CL CL
RE RE RE
RE RE RE
CH CH CH
CH CH CH
CH CH CH
AD AD AD
2-4-9
Points and cautions
Vacuum.
Vacuum. 4pcs
Vacuum.
Vacuum. 2pcs
Replace: MK-8715C
2pcs
Replace: MK-8715C
3pcs
Check the image regis-
tration and paper feed
conveying condition on
paper feed conveying
Clean with alcohol or a
dry cloth.
(lighting part and light
reception part.)
U464 (Calibration)
U410 (Adjusting the half-
tone automatically)
2N8/2N7-1
Page
P.1-5-131
P.1-5-131
P.1-5-132
P.1-5-133
P.1-5-130
P.1-5-129
P.1-3-175
P.1-3-151
Service Manual