Olivetti d-Copia 6500MF Plus Service Manual page 116

i-FAX Default Settings
Use this page to enable the internet faxing.
The settings available on the page are shown below.
Common Transmis
Settings sion
Recep-
tion
FAX Settings
i-FAX TX/RX
Settings
SMTP
Service Manual
Item
Local FAX Name
TTI Selects
TTI Position
Dept. Name Usage
Retry Times
Media Type
Use MP Tray
Reduced RX Size
Receive Date/Time
Duplex Printing
2in1 Printing
i-FAX Protocol
*1
SMTP Server Name
Enter the local fax name.
On or Off whether to send the TTI (Transmit Terminal
Identifier) information to the other party.
Selects the position of the TTI to be printed on the
transmitted documents.
Set to On to use the account name as the local FAX
name.
The account name appears in place of the local FAX
name.
Specify the number of redials from 0 to 14 times.
Sets the media type for printing the received documents.
Selects whether or not to include the MP (multi purpose)
tray for auto media selection when printing received
documents. When turned [On], the MP tray will be
included as an option for auto media selection, and when
turned [Off], only the cassettes will be selected.
Specifies the printing configuration for printing a
document, which is larger than the selected paper size.
When [Same Size Override] is selected, the document
will be printed on multiple sheets of paper without
reducing the text. When [Reduction Override] is selected,
the document will be printed on one sheet whenever pos-
sible.
Selects [On] or [Off] whether to print the reception
information such as the received date, the received time,
the transmitting party's information and the number of
transmitted pages on the top of the received documents.
Specifies whether or not to use the Duplex mode.
Enables or disables 2 in1 reception.
Configure settings for FAX. For details, refer to the
Command Center RX User Guide.
Display whether an i-FAX connection is available or not.
Configure i-FAX in [i-FAX (SMTP & POP3)] on the
Protocol Settings page.
Enter the SMTP server name or SMTP server IP
*2
address. You can enter up to 64 characters. If you enter
the server name, you must specify the IP address of the
DNS server. You can enter the DNS server IP address in
the TCP/IP settings screen. Refer to the machine's Oper-
ation Guide for details.
1-2-8 4
Description
2N8/2N7-2
Y116520-