Installing The Key Counter (Option) - Olivetti d-Copia 2500MF Service Manual

2H0/2HZ
1-2-3

Installing the key counter (option)

Installing the key counter requires the following component:
Key counter
Key counter set
Supplied parts of key counter set:
Key counter socket assembly
Key counter cover
Key counter mount
Key counter retainer
Key counter cover retainer
One (1) M3 × 8 tap-tight P screw
Two (2) M4 × 10 tap-tight P screws
Two (2) M4 × 10 tap-tight S screws
Two (2) M3 × 6 bronze flat-head screws
One (1) M4 × 20 tap-tight S screw
One (1) M3 bronze nut
One (1) M3 × 8 bronze binding screw
One (1) M4 × 30 tap-tight S screw
Four (4) M4 × 6 chrome TP screws
Two (2) M4 × 10 chrome TP screws
Procedure
1. Press the power key on the operation panel
to off. Make sure that the power indicator
and the memory indicator are off before
turning off the main power switch. And then
unplug the power cable from the wall outlet.
2. Fit the key counter socket assembly to the
key counter retainer using two screws and
nut.
3. Fit the key counter mount to the key counter
cover using two screws.
4. Fit the key counter retainer to the key
counter mount using two screws.
1-2-12
Key counter retainer
M4 x 6 screw
(302GR03020)
(B4A04060)
M3 nut
(7BC1003055++H01)
M4 x 6 screw
(B4A04060)
Key counter
socket assembly
M3 x 6 flat-head
(3029236241)
screws
(7BB003306H)
Service Manual
M4 x 6 screw
(B4A04060)
Key counter
mount
(3066060041)
M4 x 6 screw
(B4A04060)
Key counter cover
(3066060011)
Figure 1-2-15
Y108620-5