Olivetti d-Copia 6500MF Plus Service Manual page 171

Item No.
U059 Setting: [Interval Cycle]
1. Change the setting value using the +/- keys.
Display
Cnt
* : This will halt printing and activates the motor (described below) when the print count has
reached the reference value multiplied by 1000 during copying continuously.
Vibration motor (Toner disposal box)
Toner fan motor (Toner disposal box)
Toner assist fan
2. Press the start key. The value is set.
Completion
Press the stop key. The indication for selecting a maintenance item No. appears.
U061 Checking the operation of the exposure lamp
Description
Lights the exposure lamp.
Purpose
To check whether the exposure lamp are turned on.
Method
1. Press the start key.
2. Select the item.
CCD
CIS
3. Press the start key. The lamp lights.
4. To turn the lamp off, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Y116520-3
Determines the timing cycle for control-
ling the fan
Display
The exposure lamp lights
The CIS lights
Description
Description
Description
1-3-49
Setting Initial
range setting
0 to 10 1
Service Manual
2N8/2N7