Olivetti d-Copia 6500MF Plus Service Manual page 642

Clamping the drum cover
1. Insert the axle at the end of the drum
cover into the hole at the rear drum
cover arm.
* : Be sure to insert the fixing pin into the
guiding chase at the back of the drum
cover.
2. In the same manner, insert the fixing pin
at the front through the opening at the
front drum cover arm into the guiding
chase, fixing it using the drum cover fix-
ing pin.
* : After fixing, confirm that the drum cover
fixing pin won't drop by pulling it straight
backwards.
3. Hook the springs at the front and back
of the drum cover arm onto the inside of
the drum cover ribs.
Service Manual
Drum cover
Figure 1-5-104
Drum cover
Spring
Rib
Figure 1-5-105
1-5-62
Rear drum
cover arm
Fixing pin
Drum cover
Rib
Drum cover
2N8/2N7-2
Spring
Y116520-3