5. Remove two connectors.
6. Release the wire saddle.
7. Remove the wire saddle.
*: To refit the wire saddle, be sure to fit in
the positioning hole that was previously
used.
8. Remove the MP tray.
*: When refitting the MP tray, insert it in
the MP tray paper feed unit side by
turning the lift arm.
Service Manual
Figure 1-5-48
MP tray paper feed unit
Figure 1-5-49
1-5-30
2N8/2N7
Connecor
Wire
saddle
Connecor
Installation
hole
Wire
saddle
MP tray
Lift arm
MP tray
Y116520-3