Installing The Drawer Heater (Option) - Olivetti d-Copia 1600 Service Manual

1-2-4

Installing the drawer heater (option)

Drawer heater installation requires the following parts:
Drawer heater (P/N 120 V specifications: 2C960030, 220-240 V specifications: 2C960040)
One (1) M4 x 10 tap-tight S binding screw (P/N BAB54100)
<Procedure>
1. Remove the right cover.
2. Pull out the drawer.
3. Remove the three screws and then the front
right cover.
Front right cover
Figure 1-2-7
2HA/2HB
1-2-7