Olivetti d-Copia 6500MF Plus Service Manual page 422

Code Contents
6150 Abnormally low fuser press
thermistor 5 temperature
Fuser press thermistor 5
detects a temperature lower
than 30°C/ 86°F for 1 s after
warming up.
Service Manual
Related parts
Fuser unit
Engine PWB
Fuser IH PWB
Fuser IH unit
1-4-94
Check procedures/
corrective measures
1. Confirm that the wiring connector is
firmly connected and, if necessary,
connect the connector all the way in.
Fuser unit and Engine PWB (YC26)
2. If the wiring is disconnected, shorted or
grounded, replace the wiring.
3. eplace the Fuser unit (see page 1-5-67).
1. Check the engine software and upgrade
to the latest, if necessary.
2. Replace the engine PWB (see page 1-5-
83).
1. Confirm that the wiring connector is
firmly connected and, if necessary,
connect the connector all the way in.
Fuser IH PWB( YC4) and Engine PWB
(YC26)
2. Replace the fuser IH PWB (see page 1-
5-95).
1. Confirm that the wiring connector is
firmly connected and, if necessary,
connect the connector all the way in.
Fuser IH unit and Fuser IH PWB (YC9
and 10)
2. If the wiring is disconnected, shorted or
grounded, replace the wiring.
3. Replace the fuser IH unit (see page 1-5-
69).
2N8/2N7
Y116520-