Olivetti d-Copia 6500MF Plus Service Manual page 147

Item No.
U010 Setting the maintenance mode ID
Description
Sets the maintenance mode ID.
Purpose
Modify maintenance mode ID for more security.
Method
1. Press the start key.
New ID
New ID(Reconfirm)
Initialize
Setting
1. Select [New ID].
2. Enter a new 8-digit ID on ten keys (0 – 9, *, #). * and # are mandatory to contain.
3. Select [New ID(Reconfirm)].
4. Enter a new 8-digit ID on ten keys (0 – 9, *, #).
5. Press the start key. The setting is set.
Method: [Initialize]
1. Select [Initialize].
2. Press the start key. ID is initialized.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U018 Check Firmware Checksum
Description
Investigate that the firmware has not been modified.
Purpose
Investigate that the firmware has not been modified by re-calculate the checksum.
Method
1. Press the start key.
EXpected
Result
Execute
2. Select [Execute].
3. Press the start key.
Displays the checksum in [Expected] after execution.
Y116520-3
Display
Enter a new 8-digit ID
Enter a new 8-digit ID (to confirm)
Initialize the ID
Display
Displays the expected checksum.
Displays the calculated checksum.
Perform the self-investigation.
Description
Description
Description
1-3-25
2N8/2N7
Service Manual