Olivetti d-Copia 6500MF Plus Service Manual page 117

i-FAX SMTP
Settings
POP3
Y116520-3
Item
SMTP Port Number
SMTP Server Timeout
Authentication Protocol
SMTP POP before
SMTP Timeout
Connection Test
Domain Restriction
Check Interval
Run once now
Domain Restriction
POP3 User Settings
E-mail Address
POP3 Server
Name
*1
POP3 Port
Number
POP3 Server
Timeout
Login User
Name
*1
Login Password
Use APOP
Set the port number used by SMTP. Normally, 25 is used.
Enter the timeout period in seconds.
Specify whether SMTP authentication will be used or
whether [POP before SMTP] will be used. This SMTP
authentication is compatible with Microsoft Exchange
2000.
If you selected [POP before SMTP] in the authentication
setting, specify the timeout period in seconds.
Tests to confirm that the settings on this page are correct.
When the [Test] button is pressed, this machine tries to
connect to the SMTP server.
Activate or deactivate to restrict domains. Press the
[Domain List] button to configure. Enter a domain name
that is permitted or rejected. You can also specify the
Email addresses.
Displays the interval, in minutes, for connecting to the
POP3 server to check for incoming e-mails at specific
interval. Specify the interval in the range from 3 minutes
to 60 minutes. The default is 15 minutes.
Click [Receive] to immediately connect to the POP3
server and check for incoming E-mail.
Activate or deactivate to restrict domains. Press the
[Domain List] button to configure. Enter a domain name
that is permitted or rejected. You can also specify the
Email addresses.
―
Enter the i-FAX address (E-mail address). You can enter
*1
up to 64 characters.
If you enter the server name, you must specify the IP
address of the DNS server. You can enter the DNS server
IP address in the TCP/IP settings screen. Refer to the
machine's Operation Guide for details.
Sets the port number used by POP3. Normally, 110 is
used.
Enter the timeout period in seconds.
Enter the login name for the user account. You can enter
up to 64 characters.
Enter the password for the user account. You can enter
*1
up to 64 characters.
Specify whether to use APOP authentication. To use
APOP authentication, select [On] in this setting.
1-2-8 5
Description
Service Manual
2N8/2N7-2