Olivetti d-Copia 6500MF Plus Service Manual page 623

18. Remove the two scanner wire stoppers
and frame securing tools.
19. Focusing on the locating ball of the wire
drum, move aside the wires to inside.
20. Move the mirror 2 frame from side to
side to correctly locate the wires in posi-
tion.
21. Refit the mirror 1 frame.
22. Move the mirror 1 and 2 frames to the
machine left, and insert the two frame
securing tools into the positioning holes
at the front and rear of the scanner unit
to secure the frames in position.
23. Hold the wires and fix each front and
rear wire holder plate to mirror 1 frame
with the screw.
24. Remove the two frame securing tools.
25. Refit the exposure lamp.
Y116520-3
Front wire holder plate
Frame securing tool
Screw
Mirror 1 frame
Mirror 2 frame
1-5-43
Rear wire holder plate
Frame securing tool
Screw
Mirror 2 frame
Mirror 1 frame
Figure 1-5-70
Service Manual
2N8/2N7