Olivetti d-Copia 6500MF Plus Service Manual page 145

Item No.
U000
No.
U001 Exiting the maintenance mode
Description
Exits the maintenance mode and return to the normal copy mode.
Purpose
To exit the maintenance mode.
Method
1. Press the start key. The normal copy mode is entered.
U002 Setting the factory default data
Description
Restores the machine conditions to the factory default settings.
Purpose
To move the mirror frame of the scanner to the position for transport.
* : The parameter settings within the system menu will also be reset to the factory-set values.
Method
1. Press the start key.
2. Select [Mode1(All)].
3. Press the start key.
The mirror frame of the scanner return to the home position.
4. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
* : An error code is displayed in case of an initialization error.
When errors occurred, turn main power switch off then on, and execute initialization using
maintenance item U002.
* : Reset the following setting by using the system menu.
[FAX] - Transmission - Local FAX Name Entry
Error codes
Y116520-3
Description
Code conversion
A B C
0 1 2
Codes
0001 Entity error
0002 Controller error
0003 OS error
0020 Engine error
0040 Scanner error
Description
D E F G
3 4 5 6
Description
1-3-23
Supplement
H I J
7 8 9
Service Manual
2N8/2N7