7. Pass the wire of the cassette heater
through three wire saddles and then
fasten the wire.
*: Route the wire so that it do not disturb
opening and closing the cassettes.
8. Connect the connector of the cassette
heater to the connector in the rear
frame of the machine.
9. Insert two hooks of the connector cover
to the holes of base of the machine
each.
10. Install the connector cover by using a
M4 x 8 screw.
Service Manual
Connector
Cassette heater
Wire
saddles
OK
Figure 1-2-7 6
Cassette heater
Figure 1-2-7 7
1-2- 50
2N8/2N7
NG
Connector cover
Screw
Hook
Hook
Y116520-