Olivetti d-Copia 6500MF Plus Service Manual page 667

(6) Detaching and refitting the power source PWB
Procedure
1. Remove the rear lower cover (see page
1-5-3).
2. Remove 2-pin relay connector and 6-
pin relay connector.
3. Release the wire saddle.
4. Remove two screws and the connector
mount.
Y116520-3
Wire saddle
2-pin relay connector
Connector mount
Screws
1-5-87
6-pin relay connector
Figure 1-5-135
Figure 1-5-136
Service Manual
2N8/2N7