3. Affix a label on the right table cover
aligning it with the positioning mark.
*: Fix it by matching with a smoke of a dif-
ferent color.
4. The mounting procedure differs
depending type of IC card readers.
Type A:
Thicker and in the same size as its holder
Continue to step 5.
Type B:
Thicker but smaller than its holder
Continue to step 7.
Type C:
Thinner and in the same size as its holder
Continue to step 10.
Service Manual
Label
Right table cover
Figure 1-2-9 3
IC card reader
Type A
Type B
Type C
Figure 1-2-9 4
1-2-6 0
2N8/2N7
Positioning mark
Y116520-