Item No.
U030
Checking the operation of the motors
Description
Drives each motor.
Purpose
To check the operation of each motor.
Method
1. Press the start key.
2. Select the motor to be operated.
3. Press the start key. The operation starts.
Feed
DLP(K)
Fuser
SB(CW)
SB(CCW)
Job Separator
Regist
Decal
Decal Guide
Bridge1
Bridge2
IH Core
Fuser Release
DU1
DU2
Mid Roller
Vibration
4. To stop operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Service Manual
Display
Paper feed motor (PFM) is turned on
Developer motor K (DEVM-K) is turned on
Fuser motor (FUM) is turned on
Eject motor (EM) is turned on clockwise
Eject motor (EM) is turned on counterclockwise
JS eject motor (JSEM) is turned on
Registration motor (RM) is turned on
BR decurler motor (BRDM) is turned on
BR guide motor (BRGM) is turned on
BR conveying motor 1 (BRCM1) is turned on
BR conveying motor 2 (BRCM2) is turned on
IH core motor (IHCM) is turned on
Fuser release motor (FURM) is turned on
Duplex motor 1 (DUM1) is turned on
Duplex motor 2 (DUM2) is turned on
Middle motor (RM) is turned on
Toner vibration motor (TVM) is turned on
Description
Description
1-3-32
2N8/2N7
Y116520-