Olivetti d-Copia 6500MF Plus Service Manual page 391

Code Contents
0640 Hard disk error
The hard disk cannot be
accessed.
0650 FAX image DIMM check
error
A fax image DIMM which was
used with another machine is
installed.
Y116520-3
Related parts
HDD
HDD number dif-
ference
Lack of HDD
capacity
Main PWB Replace the main PWB (see page 1-5-74).
FAX DIMM.
Main PWB Replace the main PWB (see page 1-5-74).
1-4-63
Check procedures/
corrective measures
1. If an abnormal noise is heard from the
HDD, replace the HDD.
2. Check the SATA wiring between the
HDD and the main circuit PWB for loose
connection, disconnection and
damages, and that it is connected into
the correct terminal.
Main PWB: YC1,YC27
3. Replace the SATA cable.
4. Execute U024 to initialize (FULL) the
HDD (see page 1-3-29).
5. If an error is detected after executing
U024, replace the HDD.
1. Confirm whether the HDD number is
correct in U024_Composition and
change it if different (see page 1-3-29).
HDD 1piece: Single
HDD 2pieces: Multi
1. Confirm the total capacity of the HDD if it
is more than 320GB.
Change the HDD or add it in case of
lacking in capacity.
1. Confirm that a used FAX image DIMM
was used instead of the FAX image
DIMM contained in the FAX system.
2. If a DIMM that was used with other unit
has been installed, execute
maintenance mode U671 - Recovery
FAX DIMM.
3. Check whether the Fax DIMM is
properly inserted into the socket on the
main PWB.
4. Replace with a new FAX image DIMM.
2N8/2N7-5
Service Manual