Olivetti d-Copia 6500MF Plus Service Manual page 257

Item No.
U253 Switching between double and single counts
Description
Switches the count system for the total counter and other counters.
Purpose
Used to select, according to the preference of the user (copy service provider), if A3/Ledger
paper is to be counted as one sheet (single count) or two sheets (double count).
Setting
1. Press the start key.
2. Select the item to set.
B/W
3. Select the count system.
SGL(All)
DBL(A3/Ledger)
DBL(B4)
DBL(Folio)
Initial setting: DBL(A3/Ledger)
4. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U260 Selecting the timing for copy counting
Description
Changes the copy count timing for the total counter and other counters.
Purpose
To be set according to user request.
Setting
1. Press the start key.
2. Select the copy count timing.
Feed
Eject
Initial setting:
3. Press the start key. The setting is set.
Completion
Press the stop key.
* : The screen for selecting a maintenance item No. is displayed.
Y116520-3
Display
Count system of black/white mode
Display
Single count for all size paper
Double count for A3/Ledger size or larger
Double count for B4 size or larger
Double count for Folio size or larger
Display
When secondary paper feed starts
When the paper is ejected
Eject
Description
Description
Description
Description
1-3-135
2N8/2N7
Service Manual