Olivetti d-Copia 6500MF Plus Service Manual page 332

* : This model does not support the following codes:
0111 /0503 /0504 /0505 /0513 /0514 /0515 /1703 /1704 /1713 /1714 /1904 /1914 /6001 /6021 /6041 /
6101 /6111 /6311 /6401 /6411 /6511 /6811 /6911 /7001 /7951 /9004 /9006 /9007 /9020 /9030 /9200 /
9210 /9500
List of JAM Code
Code Contents
0000 Initial jam
0100 Secondary paper feed
request time out
0101 Waiting for process package
to become ready
0102 Waiting for toner package to
become ready
0103 Waiting for the image-sus-
taining package to become
ready
0104 Waiting for conveying pack-
age to become ready
0106 Paper feeding request for
duplex printing time out
0107 Waiting for fuser package to
become ready
0108 Waiting for option package to
become ready
0110 Paper conveying unit open
0112 Duplex cover open
0113 Paper conveying cover open The paper conveying cover is opened during printing.
0114 BR conveying unit open
0115 BR eject cover open
0131 MP lift sensor upper limit
detection
0132 Rotary guide detection
0200 Machine sequence error
0210 PF paper conveying cover
open
0211 SM paper conveying cover
open
0212 SM top cover open
0213 SD cover open
0214 PF paper conveying cover
(side) open
*: Refer to figure 1-4-1 for paper misfeed indication (see page 1-4-1).
Service Manual
Conditions
The power is turned on when a sensor in the convey-
ing system is on.
Secondary paper feed request given by the controller
is unreachable.
Process package won't become ready.
Toner package won't become ready.
The image-sustaining package won't become ready.
Conveying package won't become ready.
Paper feeding request for duplex printing given by the
controller is unreachable.
Fuser package won't become ready.
Option package won't become ready.
The paper conveying unit is opened during printing.
The duplex cover is opened during printing.
The BR conveying unit is opened during printing.
The BR eject cover is opened during printing.
MP lift sensor 1 (MPLS1) does not turn on within
specified time of the MP lift plate rising.
Rotary sensor (RTS) does not turn on.
A sequence error has occurred.
The PF paper conveying cover is opened during print-
ing.
The SM paper conveying cover is opened during print-
ing.
The SM top cover is opened during printing.
The SD cover is opened during printing.
The PF paper conveying cover (side) is opened during
printing.
1-4-4
2N8/2N7-1
Jam
location*
-
-
-
-
-
-
-
-
-
E
F
E
J
J
D
J
-
E
N
N
N
O
Y116520-