5. Connect the main PWB and the DP
relay PWB with the FFC.
Main PWB YC34
DP relay PWB YC35
6. Replace the upper rear cover.
7. Confirm the settings.
1) Turn the main power switch on.
2) Press the system menu key, then, System/Network.
3) The user authentication dialog is shown if user authentication is not enabled.
Enter the login user name and the login password, then, press Login.
Use an administrator privilege for login.
4) Confirm that the Confidential Guard is set to On.
Service Manual
Figure 1-2-12 4
1-2-8 0
Main PWB YC34
FFC
DP relay PWB YC35
FFC
2N8/2N7
Y116520-