Olivetti d-Copia 6500MF Plus Service Manual page 189

Item No.
U099 Adjusting original size detection
Description
Checks the operation of the original size detection and sets the sensing threshold value.
Purpose
Modify the threshold of detection if documents are frequently mal-detected in size after scanning
a wholly dark document or a document enclosed with dark objects on edges.
Method
1. Press the start key.
2. Select the item.
Display
Data1
B/W Level1
Data2
Method: [Data1/Data2]
1. Place the original and close the original cover or DP
2. The light source illuminates and the CCD sensor determines the width of the document. The
original size sensor determines the document is vertical or horizontal. (The document is
detected two times when the DP is installed.)
Original Area R
Original Area G
Original Area B
Original Area
Size SW L
Y116520-3
Displays the width of an Original Area colored original document
Setting original size detection threshold value
Displays the width of an Original Area colored original document (when
DP is installed)
Display
Detected original width size for color R
Detected original width size for color G
Detected original width size for color B
Detected original width size
Displays the original size sensor (OSS) ON/OFF
(Sensor OFF/ ON: 0/ 1)
Description
Description
Description
1-3-67
2N8/2N7
Service Manual