Olivetti d-Copia 6500MF Plus Service Manual page 295

Item No.
U460 Adjusting the conveying sensor
Description
Compensates the threshold value of the side multi tray's multi feed sensor.
Purpose
If more than one sheet is fed at a time, modify the threshold depending on the environment.
Method
1. Press the start key.
2. Select the item.
SMT
Method: [SMT]
1. Select the item.
Conveying Sensor
On/Off Config
Setting: [Conveying Sensor]
1. Select the item.
Sensor(Non-P)
Sensor
Threshold(Single)
Threshold(Multi)
Execute
Setting: [Threshold(Single)/(Multi)]
1. Select the item.
2. Change the setting value using the +/- keys or numeric keys.
Threshold(Single)
Threshold(Multi)
3. Press the start key. The value is set.
Method: [Execute]
1. Select [Execute].
2. Press the start key. Calibration is executed.
Y116520-3
Display
Settings of multiple feed sensor on the side multi tray
Display
Multi feed sensor settings/Calibration
Paper conveying sensor On/Off settings
Display
Empty paper sensor display
Displaying sensor value when paper is present
Paper feeding threshold settings
Multi feed threshold settings
Executing the calibration
Display
Paper feeding threshold settings
Multi feed threshold settings
Description
Description
Description
Description
Description
1-3-173
2N8/2N7
Setting Initial
range setting
0 to 254 0
0 to 254 0
Service Manual