Olivetti d-Copia 6500MF Plus Service Manual page 527

Defective part
Adjustment posi-
tions of the hinge
9
3. DP-scanning second (back) page
Defective part
Original document
1
DP feed roller
2
DP regist roller
3
DP regist pulley
4
Adjustment
amount of slack of
5
the original
documen
Original document
6
setting
Install the CIS
7
Y116520-3
Check description
Check the front and back adjust-
ment positions of the right hinge.
Check description
Check if the original document
has creases or foldings or
wrinkles.
Check whether the DP feed
roller is dirty.
Check whether the DP regist
roller is dirty.
Check that the DP regist pulley
is smoothly operative.
Check the amount of slack of the
original document when it
reaches at the regist.
Check that the cursor fits with
the original document.
Check whether CIS is loosely
mounted.
If the front and back adjustment positions of
the right hinge are improper, perform
adjustment.
If the original document has foldings or
creases, remove them.
If the DP feed roller is dirty, clean.
If the DP regist roller is dirty, clean.
If the DP regist pulley does not rotate smoothly,
re-install.
If the amount of the slack of the original
document roller improper is perform
maintenance mode U942, DP slack
settings.(see page 1-3-198)
Align the cursor to fit with the original
document, if necessary.
Re-mount the CIS unit if it is hanged off.
1-4-199
Corrective Action
Corrective Action
Service Manual
2N8/2N7