Olivetti d-Copia 6500MF Plus Service Manual page 571

Code
2231 Connection with the FTP server has
failed.
(FTPS communication)
3101 FTP server responded with an error.
(3) Scan to E-mail error codes
Code
1101 SMTP/POP3 server does not exist on
the network.
1102 Login to the SMTP/POP3 server has
failed.
1104 The domain the destined address
belongs is prohibited by scanning
restriction.
1105 SMTP protocol is not enabled.
1106 Sender's address is not specified.
2101 Connection to the SMTP/POP3 server
has failed.
2102 Connection to the SMTP/POP3 server
has failed.
(Connection timeout)
2103 The server cannot establish communi-
cation.
2201 Connection to the SMTP/POP3 server
has failed.
Y116520-3
Contents
Contents
Check procedures/corrective measures
1. Confirm device's network parameters.
2. Confirm the network parameters the device is con-
nected.
1. Confirm device's network parameters.
2. Confirm the network parameters the device is con-
nected.
3. Check the FTP server.
Check procedures/corrective measures
1. Check the SMTP/POP3 server name.
2. Confirm device's network parameters.
3. Confirm the network parameters the device is con-
nected.
1. Confirm user name and password.
2. Check the SMTP/POP3 server.
1. Confirm device's SMTP parameters.
1. Confirm device's SMTP protocols.
1. Confirm device's SMTP protocols.
1. Check the SMTP/POP3 server name.
2. Confirm that the LAN cable is properly connected to
the device.
3. Check the SMTP/POP3 port number.
4. Confirm device's network parameters.
5. Confirm the network parameters the device is con-
nected.
6. Check the SMTP/POP3 server.
1. Check the SMTP/POP3 server name.
2. Check the SMTP/POP3 port number.
3. Confirm device's network parameters.
4. Confirm the network parameters the device is con-
nected.
5. Check the SMTP/POP3 server.
1. Check the SMTP/POP3 server name.
2. Check the SMTP/POP3 port number.
3. Confirm device's network parameters.
4. Confirm the network parameters the device is con-
nected.
5. Check the SMTP/POP3 server.
1. Confirm device's network parameters.
2. Confirm the network parameters the device is con-
nected.
1-4-243
2N8/2N7
Service Manual