Olivetti d-Copia 6500MF Plus Service Manual page 670

(7) Detaching and refitting the high voltage PWB
Procedure
1. Remove the power source PWB (see
page 1-5-87).
2. Remove five connectors and four tabs
from high voltage PWB.
3. Remove four screws.
4. Unhook two hooks of PWB spacer and
then remove the high voltage PWB.
5. Check or replace the high voltage PWB
and refit all the removed parts.
Service Manual
High voltage PWB
Tab
Tab
Connector
Connector
Screws
High voltage PWB
1-5-90
Tab
Tab
High voltage PWB
Connector
Connector
Connector
Figure 1-5-141
PWB spacers
Screws
Figure 1-5-142
2N8/2N7
Y116520-3