Defective part
DP_SATA cable
4
DP_SHD PWB
5
DP_CIS
6
Main PWB
7
Service Manual
Check description
Check the FFC cable between
the SHD PWB and I/F PWB is
properly connected. Or, verify
conduction of the wire.
Check the CIS and the SHD
PWB is properly connected.
CIS is defective.
The main PWB is defective.
Reinsert the connector if it its connection is
loose. Or, if conduction is lot, replace the wire.
Reinsert the connector if the PWB was loosely
inserted.If not cured, replace the PWB.
Replace the CIS and perform U091 and U411.
(see page 1-3-65,1-3-152)
Replace the main PWB.(see page 1-5-74)
1-4-192
Corrective Action
2N8/2N7
Y116520-3