Item No.
U026
Pulling Backup Data
Description
Perform restoring of the backup data..
Purpose
Restores the setting values that was backed up in the flash memory from the HDD.
Method
1. Press the start key.
2. Press [Execute].
3. Press the start key.
4. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
* : NG will be displayed when an error was resulted at completion.
* : Saved data:
U278 Setting the delivery date
U402 Adjusting margins of image printing
U952 Maintenance mode workflow
Y116520-3
Description
1-3-31
2N8/2N7
Service Manual