Olivetti d-Copia 6500MF Plus Service Manual page 244

Item No.
U244 Checking the DP switches
Description
Displays the status of the respective switches and sensors in the DP.
Purpose
To check if respective switches and sensors in the DP operate correctly.
Method
1. Press the start key.
2. Turn each switch or sensor on and off manually to check the status.
When the on-status of a switch or sensor is detected, that switch or sensor is displayed in
reverse.
Feed
Timing
CIS Head
Set
Longitudinal
Lift U-Limit
Lift L-Limit
Cover Open
Open
Eject
Slant
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U245 Checking messages
Description
Displays a list of messages on the touch panel of the operation panel.
Purpose
To check the messages to be displayed.
Method
1. Press the start key.
2. Change the message using the cursor up/down keys.
When a message number is entered with the numeric keys and then the start key is pressed,
the message corresponding the specified number is displayed.
3. Change the language using the +/- keys.
Completion
Press the stop key.
* : The screen for selecting a maintenance item No. is displayed.
Service Manual
Display
DP feed sensor (DPFS)
DP timing sensor (DPTS)
DP CIS sensor (DPCS)
DP original sensor (DPOS)
DP original length switch (DPOLSW)
DP lift sensor 1 (DPLS1)
DP lift sensor 2 (DPLS2)
DP interlock switch (DPILSW)
DP open/close switch (DPOCSW)
DP eject sensor (DPES)
DP slant sensor (DPSS)
Description
Description
1-3-122
2N8/2N7
Y116520-