6. Pull out the drum unit.
7. Check or replace the drum unit and refit
all the removed parts.
8. When replacing the new drum unit, proceed as follows:
1) Perform maintenance mode U119 (drum setup) (see page 1-3-76).
2) Perform maintenance mode U140 (AC calibration) (see page 1-3-83).
3)Perform maintenance mode U464 (Calibration) (see page 1-3-175).
4)Perform maintenance mode U412 (Adjusting the uneven density) (see page 1-3-161).
5)Perform maintenance mode U464 (Calibration) (see page 1-3-175).
6)Perform maintenance mode U410 (Adjusting the halftone automatically) (see page 1-3-151).
Service Manual
Figure 1-5-98
1-5-58
2N8/2N7
Drum unit
Y116520-3