Olivetti d-Copia 6500MF Plus Service Manual page 322

Item No.
U952 Method: [Entry]
1. Select [Entry].
2. Select the area to store workflow.
Data1 - 8
3. Press the +/- keys or numeric keys to assign a maintenance Nbr. into a workflow.
Flow1 - 14
4. Press the start key. The setting is set.
Press the start key.
Executes maintenance modes defined in a workflow in succession.
Method: [Execute(USB)]
1. Press the power key on the operation panel, and after verifying the main power indicator has
gone off, switch off the main power switch.
2. Insert USB memory in USB memory slot.
3. Turn the main power switch on.
4. Enter maintenance item U952.
5. Select [Execute(USB)].
6. Select the workflow.
WorkFlowData01 - 07
7. Press the start key.
Executes maintenance modes defined in a workflow in succession.
Method: [Entry(USB)]
1. Press the power key on the operation panel, and after verifying the main power indicator has
gone off, switch off the main power switch.
2. Insert USB memory in USB memory slot.
3. Turn the main power switch on.
4. Enter maintenance item U952.
5. Select [Entry(USB)].
6. Select the workflow.
WorkFlowData01 - 07
7. Select the work flow save area.
Data1 - 8
8. Select [Execute].
Exports a workflow housed in a USB flash device to the machine.
Service Manual
Display
The area to store workflows in the machine
Display
Assign a maintenance Nbr.
Display
Workflow data in the USB flash device
Display
Workflow data in the USB flash device
Display
The area to store workflows in the machine
Description
Description
Description
Description
Description
Description
1-3-200
2N8/2N7
Y116520-