Olivetti d-Copia 6500MF Plus Service Manual page 395

Code Contents
1010 Lift motor 1 error
After cassette 1 is inserted, lift
sensor 1 does not turn on
within 12 s. This error is
detected 4 times successively.
The lock signal of the motor is
detected continuously for 1 s.
This error is detected 4 times
successively.
Y116520-3
Related parts
Cassette lift base
Check that the cassette base can be
elevating
manipulated smoothly, if not, repair or
mechanism replace.
Lift motor 1
Lift sensor 1
Feed PWB 2
Replace the Feed PWB 2.
Engine PWB
1-4-67
Check procedures/
corrective measures
1. Check that the cassette base has been
ascended.
2. Check the drive gear can rotate or they
are not unusually loaded and, if
necessary, replace.
3. Confirm that the wiring connector is
firmly connected and, if necessary,
connect the connector all the way in.
Lift motor 1 and Feed PWB 2 (YC3)
Feed PWB 2 (YC1) and Engine PWB
(YC4)
4. If the wiring is disconnected, shorted or
grounded, replace the wiring.
5. Replace the lift motor 1.
1. Check that the sensor is correctly
positioned.
2. Confirm that the wiring connector is
firmly connected and, if necessary,
connect the connector all the way in.
Lift sensor 1 and Feed PWB 2 (YC8)
Feed PWB 2 (YC1) and Engine PWB
(YC4)
3. If the wiring is disconnected, shorted or
grounded, replace the wiring.
4. Replace the lift sensor1.
1. Check the engine software and upgrade
to the latest, if necessary.
2. Replace the engine PWB (see page 1-5-
83).
2N8/2N7
Service Manual