Olivetti d-Copia 6500MF Plus Service Manual page 237

Item No.
U237 Setting finisher stack quantity
Description
Sets the number of sheets of each stack on the main tray and on the middle tray in 4000-sheet
finisher.
Purpose
To change the setting when a stack malfunction has occurred.
Method
1. Press the start key.
2. Select the item to be set.
Main Tray
Middle Tray
Setting: [Main Tray]
1. Change the setting using the +/- keys or numeric keys.
0
1
Initial setting: 0
2. Press the start key. The setting is set.
3. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Setting: [Middle Tray]
1. Change the setting using the +/- keys or numeric keys.
0
1
Initial setting: 0
Number of sheets of stack on the internal tray for non-staple copying: 10 sheets
2. Press the start key. The setting is set.
3. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Y116520-3
Display
Number of sheets of stack on the main tray
Number of sheets of stack on the middle tray for staple mode
Display
When stapling paper less than B4 size, paper full is detected
when 4,000 sheets are output.
When stapling B4 size paper, or larger, paper full is detected
when 1500 sheets are output.
When stapling 30 sheets or less, paper full is detected after
150 sets or 1500 sheets are output, whichever is faster..
When stapling 31 sheets or more, paper full is detected after
150 sets or 4,000 sheets are output, whichever is faster.
Display
Number of sheets of stack on the middle tray for staple mode:
65 sheets
Number of sheets of stack on the middle tray for staple mode:
30 sheets
Description
Description
Description
Description
1-3-115
2N8/2N7-3
Service Manual